Ask us anything ventilation!

Attic Fans,
       Restroom Fans,
                Workplace Ventilation Fans,
                     Whole House Fans.

Knowing what is needed. Free consultation about economical installations for commercial, industrial, home and office - We're the reliable mechanical contractors for the Philly area. Restaurant ventilation, public restroom ventilation, workplace ventilation, public facility, auto body, hazardous chemicals and work shop ventilation. Wall mounted fans, quiet bath fans, steam vent out fans, large volume, through the wall, pull chain type, belt driven fans and rooftop mounted commercial ventilators.

Belt Driven Fans Give us a general idea of what you are looking for and we'll price it up for you.

Mounting Mechanisms
Ceiling Fans → Why they are Beneficial and How to choose the one that's right for You. It wasn't until the late 1970's until people began noticing that these energy-efficient ceiling fans were a much cheaper alternative to air-conditioning. And as we all know today, not only cheaper but more eco-friendly. In the present day, we now have several types of ceiling fans, which vary in shape, size, and devices. They are used residentially, commercially, and industrially and will continue to grow and change for years to come.
♦INDUSTRIAL & COMMERCIAL CEILING FANS♦ It is important that commercial and industrial fans are powerful and long-lasting. They push out much more air than traditional ceiling fans and are used in many offices, factories, and other establishments. Besides being bigger than residential fans, they are different in other ways as well. In the picture to the right, you notice that there are only 3 blades⒞. They are manufactured with only 3 because, unlike residential fans, they are operated with an exceedingly high speed. Therefore, the weight of more than three blades would use more electricity, as well as put more stress on the motor, causing it to burn out more quickly. Unlike residential fans, decoration is not a concern. They are usually produced only in the colors black, white, or gray. As you can see in the photograph, it is simplified to the bare necessities: a long downrod⒡, 3 large blades, and an electric motor⒜.
All fans are made up of the same basic parts:
A. electric motor~ in the center of the fan; the control center for all of the other parts. Gets its energy source from a few different alternatives, differ in noise levels, and vary in sizes and strength (see motor size). B. motor housing~ mainly used on residential fans, it is a decorative covering to conceal the motor. In association with the motor housing, the switch housing is also used to hide the inner-workings of the fan. Also known as a “switch cup,” the switch housing is metal cylinder installed underneath and in the center of the motor. Its purpose is to hide and protect wires, switches, capacitors, etc. C. blades~ the paddles positioned around the fan that force the air to circulate. Are attached to motor by blade irons⒟ and a flywheel⒠, or rotor. They vary in material, size, and amount. As mentioned above, residential fans generally have four to five blades, while commercial fans generally use three. ♦ blade materials ~ wood, metal, plastic, and MDF*. Most popular residentially, are wood blades. Many kinds of wood can be used, such as cherry, oak, walnut, maple, teak, etc. Though the weights can slightly vary from one another, the consumer usually decides the kind of wood by its color, since it’s being used in a home. Plastic blades (typically made of fiberglass) and the metal blades are used industrially and commercially.
D. blade irons~ also known as “blade brackets,” “blade arms,” “blade holders,” or “flanges.” These are the metal supports that hold the blades to the motor. E. flywheel~ a metal or a tough rubber ring that attaches the blade irons to the shaft of the motor. The inside of the ring fastens to the shaft with a lock screw, while the outside of the ring connects to the blade irons with bolts. A substitution for the flywheel is a “dropped flywheel,” which is mounted below the fan’s motor housing, as opposed to level with the motor housing. F. downrod~ the pipe used to hang the fan from the ceiling. They come in all different lengths, depending on whether the fans are for residential or industrial use, or simply the height of the room. G. canopy~ the piece that is mounted onto the ceiling, and connects with the downrod. rotor~ an alternative part of the fan; can be used instead of the blade irons. As opposed to attaching the blades to the blade irons, the blade irons to the flywheel, and the flywheel to the motor, the rotor connects the blades right into the motor. This method decreases balance problems and more efficiently hides fasteners.	* “MDF” stands for “Medium Density Fiberboard.” This is an engineered wood, that’s produced by breaking down the wood and combining it with wax and resin. Recently, more eco-friendly materials have been used such as, recycled paper, straw, bamboo, steel, and glass. Most popularly the straw and bamboo are used, due to their fast growth. Some of these blades are manufactured to be moisture-resistant or flame-retardant. Definitely recommended given that they can be less expensive than most woods, they’re earth-friendly, reliable in strength yet flexible, and have a lesser chance of splitting.
ball-and-socket system~ a good mechanism for vaulted ceilings since the piece that connects to the downrod, moves freely which enables it to be placed on a slanted ceiling. close-to-ceiling mount~ similar to the ball-and-socket system. The difference is that it connects from the canopy straight to the motor housing, so that the whole fan can be attached to the mounting bracket. J-hook system~ also known as the claw-hook system. A metal hook is mounted to the ceiling with a metal bolt and then the fan is attached to the hook. Usually a rubber bushing is placed in between the hook and the bolt to minimize noise. low ceiling adapter * ~ This is a must for rooms with low ceilings since there is no need for a downrod. However, this adapter must be purchased separate from the fan.
Many residential ceiling fans are available with light fixtures. Also known as “light kits,” these lights come in a few different styles.
Uplights~ installed on top of the motor, facing upward. They shine light upward onto the ceiling. Down lights~ light fixtures that are mounted below the motor and shine down, adding more light to the room. Decorative light bulbs~ mounted inside the motor housing. In this case, the motor housing has glass panels so when the light bulbs are switched on, the light shines through the glass.
Fans have assorted switches, which have many controls, such as turning the fan on or off, adjusting the speed, changing the blades’ direction, and operating light fixtures that may be on the fan.
pull chain~ the original control for fans. It’s very basic, controlling both the fan speed and the light fixtures. Usually a bead chain or a cloth cord, the pull chain generally turns on the fan and goes directly to the “high” position. After another pull, the fan slows down. It continues this process until the fan turns back off. It usually cycles through three speeds - high, medium, and low; but sometimes it can have from one to four speed(s). wall-mounted~ 2 different types: ס digital control » used for all of the fan’s functions; a computerized wall control that needs no special wiring and has anywhere from three to six speeds. ס choke » comes in different forms. It establishes how much power is being sent to the fan, controlling how fast it spins. variable-speed control~ a dial is mounted on the fan. Similar to a dimmer switch, this dial can be rotated and the blades speed up or slow down depending on which way you turn the dial, as opposed to having set speeds (high, medium, low…). This can be installed in 3 different ways: ס the dial can power the entire fan » speed, off/on, and light fixtures. ס the dial is accompanied by a pull chain » pull chain controls whether it’s off or on while the dial controls the speed. Light fixtures can be controlled by either of them. ס dial and pull chain; pull chain has two modes » ¹ "high power,” ² “variable.” When the fan is in the “variable” mode, the dial can then control the range of speed. wireless remote control~ included with new luxury fans. Like any other remote control, it sends frequencies that the fan recognizes and it operates accordingly. This can also be purchased separately and installed into your current fan. Ceiling Fans are well-known for their Cooling Abilities but few know about their Heating Abilities...
HEATING (winter) → direction set clockwise, pulls air upward; takes advantage of hot air rising and cold air sinking; pulls the cold air up from the floor to mix with the warm air from the ceiling COOLING (summer) → direction set counter-clockwise, air is blown downward; doesn’t actually lower the temperature of the room, but it has a cooling effect because the breeze helps evaporate sweat and keeps the air from feeling thick [side note: all fans have an electrical switch that changes the direction of the blades.]	Usually the blades spin counter-clock wise. This enables air to be propelled downward. This is how it keeps us cool in the summer since it causes airflow in the room. Contrary to this “cooling effect,” when the blades spin clock wise, it pulls the air up. This is essential in the winter since cold air sinks and hot air rises. This way, the fan pulls the cold air up from the floor and combines it with the hot air from the ceiling. EXCEPTION: with ceilings that are two or more stories high the directions would be reversed (counter-clock wise → winter; clock-wise → summer). This is because the ceiling would be too far above the ground for the cooling effect, therefore hot air must be pushed down in the winter and hot air pulled up in the summer.
Types of Ceiling Fans
“hugger" or a “low profile” fan ~ used for low ceilings, goes hand-in-hand with the low-ceiling adapter. It’s installed just low enough that the blades don’t scrap the ceiling. Cannot be used in a room with vaulted ceilings. “Outdoor ceiling fans” ~ meant for porches, sunrooms, or any other room that’s partially outdoors since they are made of material that can endure cold, heat, and humidity. It’s important that water cannot reach the fan or the motor; they should have a rust-proof finish and non-warp blades. “Spinner fans” and “Spinner-motor fans” ~ differ only in the fact that the spinner fan does not have a motor housing. This is because spinner fans are primarily industrial fans. “Direct-drive fans” ~ uses a “Spinner / Pancake” motor and is designed with a shell that circles around an immobile central piece. The blades are connected to this shell.
Along with different fans come different motors...
“stack motor” ~ highly recommended due to its energy efficiency and its powerful drive. It uses a basic stator, a ‘squirrel cage’ rotor, and a standard flywheel. “direct-drive motors” ~ least expensive to produce, yet they are the most likely to break and are the noisiest. However, they have improved over the years and now standard for today’s fans. There are a few types of these motors: ס Spinner motor » a.k.a. the “Pancake motor”; used in direct-drive fans. Designed with a shell that circles around an immobile central piece. The blades are connected to this shell. (see direct-drive fans.) ס Skeletal motor » the best of the direct-drive motors; generally used in high-quality fans. They are developed with an open “skeletal” design, which enables maximum ventilation resulting in an extensive duration of the fan.
FOR YOUR SAFETY: When installing a fan, it should be hung minimally seven feet off of the ground to decrease risk of injury. However, depending on the activities that might occur in the room, seven feet may not be high enough. For example, carrying tall objects or high reaching can either damage the fan and/or cause injury. “WHY DOES MY FAN WOBBLE ?”: When a fan wobbles, it is irrelevant to the way the fan was mounted or the ceiling that the fan is mounted on. Causes for wobbling include warped blades, bent blade irons, blades or blade irons not being screwed on straight, or blades being different weights, shapes, or sizes. Though a “balancing kit” is included with the purchase of a ceiling fan, the kit is only capable of evening the weights of the blades as opposed to fixing the other problems that cause this. “DOES WOBBLING CAUSE MY FAN TO FALL ?”: No, your fan will not fall from wobbling. When installed, a fan uses clevis pins, which are locked with cotter pins, to secure the fan. On the other hand, light kits may loosen and possibly fall. Just make sure to follow all directions carefully and completely. Also, use the appropriate mounting screws and fasten them firmly. Light fixtures should be correctly put together and securely fastened. It’s also important to sporadically check its security, for instance making sure that it’s tight, undamaged, etc.

ventilators Electrical service, Delaware County, Delco, licensed electrician, electrician, trouble shooting, electrical contractor, 200 amp, 400 amp, electric service upgrade, Parking Lot Light services and Poles, Philadelphia, PA.

New attic fan furnished and installed $325.00. Attic Fans, Whole House Fans, Ventilation Fans, Exhaust Hoods, Rooftop HVAC. Working Hard, Promising More. Commercial, industrial, home, business and office – We are the reliable service company for every type of air conditioning system/ Anthony Tori – Licensed Electrician over 20 years. Ardmore 19003, Aston 19014, Bala Cynwyd 19004, Blue Bell 19422, Broomall 19008, Bryn Mawr 19010, Conshohocken 19428, Devon 19333, Drexel Hill 19026, Frazer 19355, Gladwyn 19035, Haverford 19041, Havertown 19083, King of Prussia 19406, Lima 19037, Malvern 19355, Media 19063, Narberth 19072, Newtown Square 19073, Paoli 19301, Plymouth Meeting 19462, South Philly 19145, 19148, Springfield 19064, Swarthmore 19081, Wayne 19087, Wynnewood 19096, Lower Merion, Marple, Radnor, Pennsylvania.

Able Group Inc. mechanical contractors 810-853-8311
Delaware County, Chester County, Montgomery County, Philadelphia PA and suburbs.
Philadelphia PA and suburbs.
Every property in these areas!

Construction Large or Small.
Construction Jobs by The Able Group Contractors for Home, Business, Office.

Dresher 19025 Fans, Fans, Fans.